tammie_norrie

Glued plywood clinker yawl           Length:  13ft 6inches  (4.11m)          Beam:  4ft 5.5inches (1.37m)

Designed by: Ian Oughtred

Construction:

  • Hull of Robbins’ Super Elite marine plywood (www.robbins.co.uk), glued with West System Epoxy (www.west-system.co.uk)
  • Keel and stem of iroko
  • Thwarts, transom etc of sapele
  • Masts, spars and oars of sitka spruce.
  • Sails by Kemp Sails (www.kempsails.com)
  • Design modified to include 170 kg of built-in buoyancy.

Completed: Autumn 2008

Guidance for Use:

  • Suitable for two or three adults, depending on location, weather and tidal conditions and the knowledge and skill of the crew
  • The design of the craft is based on a traditional working boat, and as such the Designer suggests that it does not fall within the scope of the EU Recreational Craft Regulations
  • For preliminary guidance the boat would be expected to be used primarily in RCD Class D “Sheltered Waters” (sheltered coastal waters, lakes and rivers) where wind speeds of Force 4 and significant wave heights of 0.30m and occasionally 0.50m might be expected
  • RCD Capsize Recovery Test and Flotation Test (2 adults + 50kg of equipment) successfully completed at Roadford Reservoir – 1st June 2009